Gearman (an anagram for “Manager”) is a system for farming out work units to several different servers (or several processes on one server), allowing the calling code to do something completely different while the task is performed. Gearman is not intended for inter-process communication, but is a way to tell other processes that there are work available, and letting these processes (called workers) grab a piece of work for themselves.
One of the common themes that show up at the gearman IRC channel on freenode is an attempt to understand what gearman is and how everything fits together. I’ll try to explain the different concepts and what the different responsibilities of a working gearman infrastructure are. There’s also a “Getting Started” guide on the Gearman web site with a bit of example code and installation instructions, so you might want to keep that open in another tab. So here we go: a simple gearman tutorial explaining the concepts and not just throwing example code your way.
There are three core components of a gearman installation. These are a client (someone requesting a task to be performed), a worker (someone performing a task) and the server (which coordinates tasks between clients and workers). All these three components need to be running for you to be able to something useful with gearman. It’s worth noting that I’ll use name “task” for a single item to be performed, you’ll also see this named ‘function’ (which is the name of the actual function the task asks to be performed – a server offers several “functions” that a client can call). Some APIs might also refer to a “task” as a collection of functions to be called. I’ll use the first definition; a task is a call to a function on the server, together with the data for the task and a task identifier. Several subsequent tasks will call the same function.
I’ll go a bit more in detail about each of these components, but it’s important that you understand how everything is interconnected first. An exchange of messages between the different parts can be illustrated as follows:
client -> server: ask server to perform a task server acknowledges request and assigns an identificator to the request server -> all workers: tell workers registered for the task that there is work to be performed worker -> server: I'll perform the task you just told us about server -> worker: ok, go ahead, here's the information about the task. worker -> server: here's the result of the task performed server -> client: here's the result of the task you asked me to get someone to do for you
The idea behind the server telling all the workers that there are work available is to let the worker that responds fastest to actually get the task, as it’s assumed that this is the worker with the least load on the server it’s running on (as it responds quickly, the server is not busy doing other things). As I wrote above, the worker is the piece of code actually doing the work – the worker performs the task that a client has submitted to the gearman server.
You’ll find that most of Gearman is designed according to the same principle – keep stuff simple. The server only needs to keep track of which workers perform which functions, and then let the workers grab a task when it becomes available.
The Gearman Client
In Gearman the client is the piece of code that connects to the server and asks for a task to be performed. This can be a dynamic web page (running in python, ruby, PHP, perl or another language with a suitable Gearman library), a completely application that connects to Gearman, a worker (to submit a new task or to divide the current task into several smaller tasks to be performed by other workers) or a combination of the above. The important part is that this is simply a client – it has a task that needs to be handled, and it’ll ask the Gearman server to find someone who can perform the task.
The client can be run in synchronous (blocking) or asynchronous (non-blocking) mode. The first will make the client wait until the task has been performed by a worker (and if no worker is available, it’ll wait indefinitely or until reaching a timeout in the client), while the latter will simply fire-and-forget the task to the Gearman server (the server will confirm that the task has been received) and then go on its merry way afterwards. The Gearman server will provide a task identification value which the asynchronous client can use to query the current state of the task it asked to be performed (as long as the actual worker provide such updates).
A small example of how a client might work (using PHP):
$arguments = array(
'url' => 'http://www.example.com/',
This will submit a request to a Gearman server running on the same machine as the script, asking for the function “fetchURL” to be run, and including an array of arguments to the function (you could simply include just the URL, but I find that this way is easier to extend in the future – and using JSON for data exchange makes the worker code more programming language independent). This code uses addTaskBackground to submit the task to be performed in an asynchronous manner. We’re not interested in the result of this task in this particular piece of code – the worker will either provide the result through other means (storing it in a database, in memcache, call an API function telling us that it’s finished) or perhaps we’re not interested in the result at all, just that we’ve attempted to perform the task. If you’re using the synchronous interface, the data returned from the worker will be returned to your code as the return value from the client.
As you can see, the client code is very, very simple. There is no actual work being performed here, we’re just telling the server that we’d like some work to be performed for us.
The Gearman Worker
The Gearman worker is where all the actual work (.. who’d guess) is performed. This is the application that receives a notice that it has to wake up and do a bit of hard work, and which actually goes out and does just that. What kind of work it does depends on what you’re using Gearman for, but a couple of use cases could be to resize an image into smaller sizes (such as thumbnails), to convert an uploaded video into another format for a specific device, sending notification emails, updating an internal search engine such a Solr and quite a few other tasks. As long as the task is not important for the application to continue running (no need for waiting for an E-mail to be delivered if you’re going to show a “Your information has been saved” message), then Gearman (and other alternative message queues) is a valid solution.
You’ll run each worker as its own process. A worker can perform several different functions (although you should (usually) stay away from multi-threading to perform them at the same time). This means starting several copies of the same worker if you want to allow for more than one worker performing a task at the same time (i.e., if you want to send 30 e-mails in parallel), you’ll start each worker as separate processes (30 workers in that case). There are several daemons and frameworks that can help you manage the number of processes available depending on server and task load, such as supervisord and GearmanManager (a PHP daemon). Another possible solution is to use screen to start several workers, which also will allow you to attach to the output of any worker at any time.
How the worker performs its work is up to the worker itself. In most cases you’ll have to write a bit of code to expose your code as a Gearman function (so that clients can submit tasks to perform that function), but this code will usually just instantiate the worker framework from the Gearman library you’re using, letting you register what functions you’ll be able to perform and attaching callbacks telling the library what part of your own code should be called when a request to perform a task arrives.
A simple example modified from the Gearman Getting Started guide:
$arguments = json_decode($job->workload());
print("Fetching " . $arguments['url'] . "\n");
The $worker->work() method call will wait until a work arrives, then execute the callback as defined in the addFunction call. addFunction instructs the worker to tell the gearman server that this worker is able to perform any tasks calling the “fetchURL” function. The callback provided to the library (“call this PHP function (‘fetch_url’) when tasks want to call ‘fetchURL'”) will then receive the job object containing information about the job (task) to be performed. The workload() method returns the workload – the information we included in addition to which function to call in the client example. The server receives the workload from the client and then sends it to the worker together with the task information.
Since our client calls the server using the asynchronous interface it’ll not wait for the worker to return the web page contents, but by using ->do() or one of the other foreground methods in the PHP Gearman library.
The Gearman Server
The Gearman Server used is usually the C version of the server. There’s also a PERL version, but these days the C server is the one being actively developed. There’s not much to say about the server, you usually just start it and let it run by itself, doing what it was supposed to do all along.
I’ve got one simple suggestion if you’re just playing around with Gearman for the first time: start the server with the -vvv option. This will make gearmand a lot noisier, and will allow you to see clients registering themselves with the server, pinging the server and getting a bit more information about what’s happening inside the server process.
You’ll also want to provide an IP address that the gearman server should bind to – by default it binds to all interfaces, and since gearmand does not have any authentication built in by default, you don’t want to expose your server to the whole world.
Here’s an example of how we start gearmand at one of our servers:
screen -d -m -S gearmand /usr/local/sbin/gearmand -L 127.0.0.1 -p 4730 -vvv
You can drop the part related to screen if you just want to play with gearmand:
/usr/local/sbin/gearmand -L 127.0.0.1 -p 4730 -vvv
If you have gearmand in your path and not in the same location as us, drop /usr/local/sbin :-) This will bind gearmand to your localhost and use the default port (earlier the default port was something other than 4730, so we provide it just in case).
Making it all come together
The easiest way to play around with gearman is to simply open three terminal windows: one for gearmand with logging turned on, one for your worker and its output and the last window for a client sending a task request to gearmand (you can use the ‘gearman’ binary for this, just be sure to include any data in an appropriate format). As you submit a task for a function that the worker has registered, you should see it pick it up and then start processing the task as soon as possible. After a while (depending on how you’ve implemented your worker and what function it performs) the result should appear in your client.
Our production setups usually use a web application (PHP or python/django) as the client in the above scenario. The functions are usually long running tasks, such as analysing GPS paths, encoding videos and downloading files or internal web site analytics (where we just want to get things logged and not wait for the actual logging to complete). The web application submits a request to gearmand as soon as a file has been received, with a payload of the path to the file to be processed. The workers perform their function and then store the information back into the database or to disk, then usually call a web service to tell the web application that the work has been performed and any internal state can be updated to include (and show) the result of the task.
Message queues (such as Gearman) has become one of the core technologies behind many modern web applications (and non-web applications for that matter), so there’s really no reason to avoid at least playing around a bit with it and adding another possible tool to your future options.